Quick Sewing Gun

• size: about 12.4cm*12.9cm*2.4cm
• weight: 125g

     How to insert and replace the needle?

1. Turn white needle lock from left(9.00) to right(3:00) to unlock the needle
2. Ensure the needle slot lined up with the slot of the gun, The siot runs along the length of the needle
3. Once the needle is fully inserted, turn white needle lock backto 9 o'clock to lock needle in place.
   Resistance indicated an improperly inserted needle. Repeat steps 1 2&83.
4. Confirm that the needle is properly installed and locked in position by squeezing the tigger-
   Always point the gun away from yourshelf and others.

     How to load the attachment?

1.  Squeeze trigger and don't loose .
2.  Insart a row of fastener (T letter port) into T slot located the top of the tagging gun gently until you feel a click.
3. Release trigger. Genly pull the attachment to ensure the attachment is locked in position.The correctly installed attachment is fixed
4. To verify the correct assembly of the fasteners, squeeze the trigger and observe the attachment through the needle. If fastener fails to feed or discharge, remove the clip by taking off the needle and gently pulling the attachment. Repeat steps1,2&3 of inserting & replacing the needle.